# Installation & Activation Guide

## Installation Video

{% embed url="<https://www.youtube.com/watch?v=hp7T6NMPWIo>" %}

## Basic Steps

### 1. Verify system requirements

Make sure your system meets the [minimum requirements](https://help.besmart.software/erpp/es-erp-picker/broken-reference) recommended for Autodesk Inventor and check you have sufficient privileges to install applications.&#x20;

### 2. Download the installation file

Use the official [download link](https://download.holixa.com/?id=holixa-t4i).

### 3. Run the installer

Once the download is complete, double-click the file to start the installation process.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 3. Accept the license agreement

Read the license agreement thoroughly and accept it before continuing with the installation. Then click the Install button.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 4. Allow making changes

If prompted by MS User Account Control, click "Yes" to allow the installation process to make changes to your computer.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 5. Wait

Wait for the installation process to complete.

### 6. Finish the installation

Once the installation is complete, click "Finish".

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 7. Run Inventor

Launch the Autodesk Inventor to get access to Holixa T4I.

### 8. Unblock the add-in if necessary

Should you, in rare cases, get the message about an add-in being blocked by Inventor, go to `Tools -> Add-Ins`, find the *Holixa: Tools for Inventor*, and check both *Load Automatically* and *Loaded/Unloaded* checkboxes.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 9. Choose the Web License

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 10. Login

Fill out the login details you received by e-mail or were provided by your contract manager. Then click *Connect*.

Alternatively, if you want just to test the application, you can click the *Start trial version* button.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 11. Quit the Holixa window

After successful login click the *Quit* button.

### 12. Continue in Inventor

Then continue in Inventor by opening any existing or new document.

### 13. Boost your productivity with Holixa T4I!

Now you're all set, you can start boosting your productivity with Holixa T4I!

## Additional (Not Mandatory) Steps

### 1. User interface language

The language of your HolixaT4I user interface will be selected automatically based on the user interface language of your Inventor installation. You can change it anytime from `Holixa T4I Settings -> General` ribbon, `Language` drop-down list.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

### 2. Country of support

When you access technical support for the first time, you have the option to select the support country corresponding to the country of your T4I license supplier.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>

Also, the support country can be changed anytime from the Holixa T4I settings.

<figure><img src="broken-reference" alt=""><figcaption></figcaption></figure>