> For the complete documentation index, see [llms.txt](https://help.besmart.software/older-26.0.0/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.besmart.software/older-26.0.0/commands-overview/holixa-t4i/edit-settings/auto-iproperties/automatic-update-of-iproperties.md).

# Automatic update of iProperties

## Workflow overview

On tabs File, Physical, Drawing, and Sheet metal, select the desired iProperties that should be automatically updated in a document.

<table><thead><tr><th align="center"></th><th align="center"></th><th data-hidden></th></tr></thead><tbody><tr><td align="center"><img src="/files/fS4Lxci9PCRAVmcke1fZ" alt=""></td><td align="center"><img src="/files/xdoWZ9FYdiIiyebVXxvW" alt=""></td><td></td></tr><tr><td align="center"><img src="/files/TnMLtFG4HjTnXJoWA8SE" alt=""></td><td align="center"><img src="/files/VWIyrGo88kd9TwAGXObM" alt=""></td><td></td></tr></tbody></table>

{% hint style="warning" %}
If an iProperty is missing in a *Custom iProperty* section of the document, it is necessary to check the option *Create property if needed (or just update existing)* in the bottom left corner of the settings window).
{% endhint %}

{% hint style="info" %}
Only document-relevant iProperties will be created/updated in the document. It means that e.g. sheet metal properties will not be created/updated in the assembly file.
{% endhint %}

The iProperties will be automatically created after saving the document.

### Workflow example

Given the specific settings for the assembly file depicted in the images above, four iProperties were automatically added to the document: *Filename*, *LastSaveDate*, *LastSavedBy*, and *Mass*.

<figure><img src="/files/mfajAVsRPyNMzA0MuNZC" alt=""><figcaption><p>IProperties added to the assembly file</p></figcaption></figure>

#### Workflow showcase

<figure><img src="/files/d0iGFTLNJaGgD6rx3dDl" alt=""><figcaption><p>Setting up of automatic iProperties for the assembly file</p></figcaption></figure>