> For the complete documentation index, see [llms.txt](https://help.besmart.software/older-26.0.0/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://help.besmart.software/older-26.0.0/commands-overview/iproperties-transfer/drawing-to-model.md).

# Drawing to Model

## Command Description

<figure><img src="/files/F9ARjVJ0TA2U9VFdebkb" alt=""><figcaption></figcaption></figure>

This command synchronizes the properties (iProperties) from the drawing to its associated model.

A notification pop-ups after the command is successfully executed.<br>

<figure><img src="/files/RbwO0Kf3jaZuWHci0vWv" alt=""><figcaption></figcaption></figure>

## Command Location

* Drawing environment

## Command Settings

`Holixa T41 ribbon -> Holixa T4I -> Edit settings -> Auto iProperties -> Synchronize`. For more information, see [Synchronization of iProperties](/older-26.0.0/commands-overview/holixa-t4i/edit-settings/auto-iproperties/synchronization-of-iproperties.md).

## Workflow Overview

1. Just run the command.