# Sync camera

## Command Description

<figure><img src="/files/53cIRT0TMGr8KarrrQF4" alt=""><figcaption></figcaption></figure>

This command allows the user to sync view orientations of two different models (parts or assemblies), so the models can be displayed side by side. That makes it easy to compare both models visually or use one model as a reference for designing the other model.

## Command Location

* Part and assembly environment (Model section on Holixa T4I ribbon; Windows section on View ribbon).

## Command Settings

This command has no settings.

## Workflow Overview

1. Set the windows tiling/arrangement from Inventor's View ribbon -> Windows.
2. Run the command.
3. Select the views to synchronize.

## Example of using the Sync camera command

<figure><img src="/files/ZB8fPftzWBFsSuHG4ZEg" alt=""><figcaption><p>Example of using the Sync camera command</p></figcaption></figure>


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.besmart.software/older-26.0.0/commands-overview/model/sync-camera.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.